- CCChristopher C.Verified BuyerYesterdayRated 5 starsAwesome Product!!
These work amazing! We have a 4ft diameter wreath, 3 of these sea suckers worked perfectly.
- JGJoyce Goblirsch C.Verified Reviewer3 months agoRated 5 starsSeaSucker wreath hanger
Great on glass, wreath up in seconds
- JSJoseph Scott P.Verified Buyer2 days agoRated 5 starsPerfect for my 30" pre-lit wreath. Secure and as good as advertised
Used to hang my 30" pre-lit wreath (with its 4 x D batteries) on outside of my front window over the driveway. Worked like a charm. Checked the indicator every couple of days but rarely needed to pump it. Held up through all weather in NJ from Black Friday till the first week of January.
- LCLisa C.Verified Buyer1 month agoRated 5 starsThe best most secure wreath hanger
I have tried many other wreath hangers to no avail. This is the best item and my wreath is secure on my front door. Thank you.
- TDTheresa D.Verified Buyer6 months agoRated 5 starsGreat wreath hanger for glass
Strong, easy to use and doesn’t damage the door - all good - actually excellent
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.