US / en
We don't like to brag, but SeaSucker has the best mirror mount on the market. With our vacuum mount technology, you can mount it anywhere on your vehicle or boat in seconds and remove just as quickly. Plus, with over 120 pounds of pull-strength per mount, you can rest assured this mirror isn't going anywhere - no matter how technical the trail or rough the waters.
Couldn't load pickup availability
SeaSucker's got you covered! Check out all of the latest releases from our innovative Off-Road & 4x4 Accessory Collection!
- Q: How strong are the vacuum mounts?
- A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
- Q: How long do the vacuum mounts last before they lose power?
- A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
- Q: Do I need to clean the surface I’m going to attach my SeaSucker to?
- A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
- - Approx. 10.5" long, 5.75" tall.
- - Mirror itself is approx. 7.5" long, 5.75 tall.
- - Manufactured from 1/2" thick high-density polyethylene (HDPE) for strength and durability.
- Mirror manufactured from acrylic.
Customer Reviews
- DCdavid c g.Verified Buyer11 months agoRated 5 out of 5 starsSide mount mirror
5* for automotive applications. 4* for marine applications. Even though it is very sturdy, and stays where you put it, it needs a wider field of view for most boaters. I’d suggest a 3x8 or 3x10 option using the same side mount suction cup. Otherwise, it is an ideal option for a boater that wants a removable rear view mirror.
- ELEd L.Verified Buyer1 year agoRated 5 out of 5 starsCar temporary side view replacement for deer damage
This was what we were wanting. A deer T-boned us a few miles from home on a 1000 mile trip. Our driver side view mirror was hanging by the wires. I disconnected the wires and continued the trip with a passenger as my constant lookout for lane changes. En route, we had hours to search, and found this as the only suction cup mirror available anywhere. At our destination, I called and Geo assured me that it could be sent immediately to our hotel. It arrived in 2 days. Our return home was much safer than our outbound trip. The mirror slowly slid down the window 1/2" because I used the sealant, but once it touched the window seal, it was immobile. Now, safely home, we can get an original replacement mirror. Thanks for a solid product and quick shipment.
SSeaSucker1 year agoHi Ed,
Don't use the lube on the pads! It is for the internals of the pump mechanism. Glad you're liking the mirror, thanks for the review.
- TBTerri B.Verified Buyer20 hours agoRated 5 out of 5 starsMirror Mount
This works perfectly for our jet ski. Great hold!
- JUJennifer U.Verified Buyer4 days agoRated 5 out of 5 starsMirror mount
As advertised!
- JWJohn W.Verified Buyer1 week agoRated 5 out of 5 starsPathfinder center console
work perfect for my need.
OFFICIAL PARTNER TO THE UCI & TEAM JUMBO VISMA
Innovation is the foundation of our company. Our founder, Chuck Casagrande, has invented well over 200 different products to date. Every year SeaSucker works to introduce more and more creative solutions for the athlete or angler on the go.
SeaSucker’s R&D team promise to continue to provide consumers with premium products centered on innovation.
READ MORE READ LESS
WATCH
