Everyone thinks they’re going to catch something special on their camera these days (still waiting on a decent Bigfoot video), but you’ll never get that perfect shot if your GoPro or other action camera isn’t ready and rolling. What better way than to attach it to our Action Camera Mount. Attach it to the car, boat, helicopter, ATV, canoe, or wherever you want since the SeaSucker makes it so easy.
Couldn't load pickup availability
SeaSucker knows how important it is to have a reliable mounting system for your camera equipment! Choose from any of our super strong and reliable camera mounts below.
Tripod adapter designed to mount GoPro & other action cameras
- Q: How strong are the vacuum mounts?
- A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
- Q: How long do the vacuum mounts last before they lose power?
- A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
- Q: Do I need to clean the surface I’m going to attach my SeaSucker to?
- A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
- - Anodized aluminum tripod adapter
- - 4.5" SeaSucker Low Profile Vacuum Mount with two stainless 1/4-20 inserts in the top and side
- - 3" Total Height
Customer Reviews
- DDoodnVegasVerified Buyer3 hours agoRated 5 out of 5 starsGot washboard, NO PROBLEM!
I heard about these from a YouTuber covering SEMA. I just received mine and took it out to Big Dune, Armagosa Valley and mounted my GoPro and Insta360 X3 and ripped and roared over washboard with no problems. I came back today and purchased the extended arm camera mount. These are amazing!
- JGJoseph G.Verified Buyer5 months agoRated 5 out of 5 starsIt Really Sucks😂
This mount held up through all the trails in UWharrie National Forest in NC but especially on Daniel 390 and Dickey Bell. Then the next day at the Gulches of Indian Mound Waterloo, SC. It especially stayed mounted even after getting stuck and winched out of a sinkhole obstacle name the “Water Cooler”. Not once did I see the orange ring. This is an amazing Mount!!! And I’ve recommended it to all my 4x4 family!!! Keep up the good work😁
- THThomas H.Verified Buyer3 months agoRated 5 out of 5 starsAction mount review
Great product. Crazy suction...
- KGKevin G.Verified Buyer6 months agoRated 4 out of 5 starsGreat Product
Great low-profile mount.
- RRRich R.Verified Buyer6 months agoRated 5 out of 5 starsVery robust
This camera mount works great! It can handle high speeds and branches.
FAQS
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
Use this text to share information about your brand with your customers. Describe a product, share announcements, or welcome customers to your store.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.
OFFICIAL PARTNER TO THE UCI & TEAM JUMBO VISMA
Innovation is the foundation of our company. Our founder, Chuck Casagrande, has invented well over 200 different products to date. Every year SeaSucker works to introduce more and more creative solutions for the athlete or angler on the go.
SeaSucker’s R&D team promise to continue to provide consumers with premium products centered on innovation.
READ MORE READ LESS
WATCH
