US / en
You made the not-insignificant investment in a WeBoost Drive Reach Overland mobile phone signal booster, so now you need a slick way to mount the antenna on your rig. SeaSucker’s WeBoost Antenna Mount allows you to attach it wherever you need it, and when you’re not cruising the outback you can protect it by easily stowing it inside. SeaSucker’s vacuum mounts are a powerful, reliable way to attach your signal booster. Pre-drilled to match the WeBoost Drive Reach Overland antenna’s hole pattern and uses WeBoost’s standard hardware to attach.
weBoost Signal Booster and mounting hardware is NOT included
Couldn't load pickup availability
SeaSucker's got you covered! Check out all of the latest releases from our innovative Off-Road & 4x4 Accessory Collection!
weBoost Signal Booster and mounting hardware is NOT included.
- Q: How strong are the vacuum mounts?
- A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
- Q: How long do the vacuum mounts last before they lose power?
- A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker.
- Q: Do I need to clean the surface I’m going to attach my SeaSucker to?
- A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
- - Approx. 11” tall x 5“ wide x 2.5” deep
Customer Reviews
- LSLeonard S.Verified Buyer1 month agoRated 3 out of 5 starsShort term solution
I've heard the name "SeaSucker" and have heard some good and some bad, I decided to give it a try based on being a Florida company with US made products. I change trucks every 2 years or less and wanted to avoid the cost, downtime and permanence of another NMO or hard mount antenna. I work in the energy services business and cell phone boosters are a must. This unit seems to hold well but will require daily pumps no matter how much effort you put into cleaning and prepping. If you had a road trip and needed this it wouldn't be bad, it would be had to justify the price for a few uses. Overall it does feel quality but it is also bulky and protrudes pretty far off your back glass. That said the sucker does it's job. I have run 85+ mph West Texas roads without issue, driving rains, winds and sand have not shaken it loose nor have ranch roads, forest service roads or any other harsh conditions I've thrown at it. You can fold down and run through a carwash without too much worry as well.
Overall it's not a bad product but in retrospect I will just bite the bullet and hard mount the antenna going forward.
SSeaSucker4 weeks agoHey Leonard,
If you want it to become more permanent, just leave it on the vehicle and keep re-pumping. After about 2 weeks, you'll hardly have to pump the mounts up moving forward. Dust fills in the microscopic holes that air escapes and makes the vacuum mounts nearly resilient to losing vacuum pressure.
- RDRoger D.Verified Buyer1 month agoRated 5 out of 5 starsAWESOME WeBoost Mount!
Our Sea Sucker WeBoost Mount is absolutely FANTASTIC! Very easy to mount and holds up to long-distance highway speed travel and off-road driving. Awesome product!
- JHJohn H.Verified Buyer4 days agoRated 5 out of 5 starsWeboost mount
This is a great solid mount for the Weboost antenna. The best no drill/glue mount for my antenna. The SeaSucker customer service team is responsive and they back their product. I had an issue with the one of the suction cup, with one email the customer service team quickly resolved the issue. Thanks SeaSucker for a great product and service!
- RRR. R.Verified Buyer1 week agoRated 5 out of 5 starsNice product
I have a 22 Ford F150. Worked above and beyond than what I was expecting. I am very pleased with its performance. I have used other suction cup mounts. They either stopped working after a few times, fell off at highway speeds, or used subpar materials. I do not use my booster when I am home. But, have to have it when I travel because majority of my customers are in remote rural areas. This is the perfect fix for my situation. GREAT PRODUCT!!!
- BKBruce K.Verified Buyer1 month agoRated 4 out of 5 starsHolding strong so far.
Works well so fat on my motorhome.
OFFICIAL PARTNER TO THE UCI & TEAM JUMBO VISMA
Innovation is the foundation of our company. Our founder, Chuck Casagrande, has invented well over 200 different products to date. Every year SeaSucker works to introduce more and more creative solutions for the athlete or angler on the go.
SeaSucker’s R&D team promise to continue to provide consumers with premium products centered on innovation.
READ MORE READ LESS
WATCH
