US / en
You made the not-insignificant investment in a WeBoost Drive Reach Overland mobile phone signal booster, so now you need a slick way to mount the antenna on your rig. SeaSucker’s WeBoost Antenna Mount allows you to attach it wherever you need it, and when you’re not cruising the outback you can protect it by easily stowing it inside. SeaSucker’s vacuum mounts are a powerful, reliable way to attach your signal booster. Pre-drilled to match the WeBoost Drive Reach Overland antenna’s hole pattern and uses WeBoost’s standard hardware to attach.
weBoost Signal Booster and mounting hardware is NOT included
Couldn't load pickup availability
SeaSucker's got you covered! Check out all of the latest releases from our innovative Off-Road & 4x4 Accessory Collection!
weBoost Signal Booster and mounting hardware is NOT included.
- Q: How strong are the vacuum mounts?
- A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
- Q: How long do the vacuum mounts last before they lose power?
- A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker.
- Q: Do I need to clean the surface I’m going to attach my SeaSucker to?
- A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
- - Approx. 11” tall x 5“ wide x 2.5” deep
Customer Reviews
- DBDeborah B.Verified Buyer2 months agoRated 5 out of 5 starsWeboost mount thoughts
We needed a non-invasive solution to mounting a Weboost Overland booster. This will be moved at a later date as the truck build progresses.
The Seasucker booster mount met these needs. I've use similar suction mounts in the past for mounting professional cameras to vehicles. The Seasucker mount is as good quality as any I've used. The only complaint is, it is a bit on the pricey side. Otherwise, it works as advertised and I would trust it for temporary non-invasive camera, antenna, or other accessories.
- JMJim M.Verified Buyer3 months agoRated 5 out of 5 starsMulti use Sea Sucker mount.
Prior to ordering, ensure you have the required antenna adapter mount to go with the product.
- CCChad C.Verified Buyer5 months agoRated 4 out of 5 starsA little disappointed
I have a few different Seasucker products and never had an issue but like others have said I have trouble getting this to stay attached. It’s also a lot bulkier than I expected.
SSeaSucker5 months agoReach out to us at info@seasucker.com. Could be a dirty glass panel, or a faulty cup. If it's a faulty cup we will replace right away no questions asked. Try using water before installation.
- DJDeven J.Verified Buyer8 months agoRated 5 out of 5 starsExcellent Product
We used the weboost SeaSucker mount on the back window of our Chevy Colorado. We took it on 4 days of rough driving and highway use and it served us very well. At each gas station we removed the weboost and tucked it inside the trucks cab, to avoid persons from stealing our weboost antennae. The seasucker mount helped us improve our cell phone reception and increase our security.
- DDylanVerified Buyer8 months agoRated 5 out of 5 starsAwesome Product
I installed this on my Jeep Cherokee and it holds very well, just double check the inflators once every 2 weeks and give them a small pump if needed. Works awesome in the snow too and holds the seal. Awesome solution for someone who doesn’t want to drill into their roof of doesn’t have good options for clamping onto the roof bars.
OFFICIAL PARTNER TO THE UCI & TEAM JUMBO VISMA
Innovation is the foundation of our company. Our founder, Chuck Casagrande, has invented well over 200 different products to date. Every year SeaSucker works to introduce more and more creative solutions for the athlete or angler on the go.
SeaSucker’s R&D team promise to continue to provide consumers with premium products centered on innovation.
READ MORE READ LESS
WATCH
