- ARAndrei R.Verified BuyerYesterdayRated 5 starsVery good!
Found this mount, useful and convenient!
- BPBrian P.Verified Buyer2 months agoRated 5 starsDoor Holder
I took off my door hold opener on the motorhome so I could fully open the door instead of being limited to 90 degrees. This works so well! I don’t have to worry about the wind tearing loose the door and breaking the window and it certainly looks better and is easier to use than the rope I had it held open with before.
- AA.F.Verified Buyer2 months agoRated 5 starsJust what I needed
Perfect iPad mount for my boat. Modified the Naked mount to suit my center console. Awesome product!!!
- MOMarty O.Verified Buyer3 months agoRated 5 starsBest door holder for LTV
Saw this product on a post on a FB LTV enthusiasts group, so I bought one for our 2013 LTV UNITY MB24 and we love it. We are at an LTV Rally in Estes Park, CO this weekend with groups from the Rockies & Texas / Oklahoma, and we shared the naked flex arm to our fellow rvers, and it looks to be a hit!
- GWGlenn W.Verified Buyer3 months agoRated 5 starsSea Sucker Naked Flex Mount /white
This mount is awesome. I bought a new iPad Pro 5th gen 12.9 inch. I put the iPad in a cheap Amazon case. And attached it all to my 19’ boat and hit the ocean. I had no doubt in the set up or the performance of the suction cups. Been in use for about 10 full day outings and never had to pump the cups or anything. I do take the whole set up apart and in the house after my trips to prevent theft and also I keep the protective covers on the suction cups to keep like new. The cups are super strong. You can try to wiggle around to test your application, and you will feel how sturdy it is. Highly recommend.
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.