- ATAbe T.Verified Buyer1 month agoRated 5 starsSmall Waste Band
Love this product - the suction cup sticks to the wall of my pontoon boat like glue.
Plan on buying another!
- EMEdward M.Verified BuyerYesterdayRated 5 starsTrash collector
Can use just about any where there is a flat surface
- DYDoug Y.Verified Buyer3 weeks agoRated 5 starsPerfect size for my boat
Adheres very solid to fiberglass, is just the right size for my boat. Solid piece too!
- LSLayne S.Verified Buyer1 month agoRated 5 starsWaste Band - Small
Such a great product. Love the versatility. Can be mounted anywhere!
- VGVictor G.Verified Buyer2 months agoRated 5 starsProduct review
Excellent product. Very useful and easy to use
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.