- WHWerner H.Verified Buyer3 months agoRated 5 out of 5 starsMulti use gem from SeaSucker!
I use this for bike cleaning when out at events. Works great with a grocery store bag for containing cleaning rags. I also discovered that if you mount it at the right height then it can securely hold a bike upright while cleaning. This now lives in my race/event kit.
- ATAbe T.Verified Buyer11 months agoRated 5 out of 5 starsSmall Waste Band
Love this product - the suction cup sticks to the wall of my pontoon boat like glue.
Plan on buying another!
- KCKenneth C.Verified Buyer2 hours agoRated 5 out of 5 starsWaste Band
Great simple product. Easy to remove when we will be away from the boat for a while.
- SFSeth F.Verified Buyer3 weeks agoRated 5 out of 5 starsTrash
This is the best trash bag holder out there. We have tried them all over the years. Finally have one that works.
- TATom A.Verified Buyer1 month agoRated 5 out of 5 starsSmall Waste-used on pontoon boat
Worried I may loose the little clips to hold the bag over time.
If you could make it so the clips are attached someway and slide around or hinge, that would be a nice feature in the future.
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.