- MDMichael D.Verified Buyer9 hours agoRated 5 starsAmazing product
Very well made useful product. The build quality is impressive
- CSCarin S.Verified Buyer1 month agoRated 5 starsGame changer
Love this product! Makes life on a boat easier.
- TRTommy R.Verified Buyer1 month agoRated 5 starsGreat product.
When we are at the sandbar having a drink and eating with our friends we attach the sea sucker to the side of the boat with a garbage bag in it very convenient works very well everybody seems to love the idea
- JTJOE T.Verified Buyer2 months agoRated 5 starsHolds a big bag
This perfect for a back deck or large galley. Holds a 33 gallon bag perfect but also works with a 48.
- NKnorwood k.Verified Buyer3 months agoRated 5 starsBrilliant
This has been so helpful on my back deck to hold my garbage. Don’t know what I would do without it. And it is very strong.
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt. Let us make it easy for you: get one of our Cleaning Kits.
No, the HDPE and the raw materials we use to manufacture our vacuum mounts all have a high-performance UV inhibitor built in. Your SeaSucker products should look good for years.
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.